Tascam US-2000 Owner's Manual

Also see for US-2000: Quick start guide

Tascam US-2000 Owner's Manual Manual pdf 9 page image

TASCAM US-2000 9System requirementsSee the TASCAM website for updated information aboutOS compatibility.WindowsWindows XP 32-bit SP2 or laterWindows XP 64-bit SP2 or laterWindows Vista 32-bit SP2 or laterWindows Vista 64-bit SP2 or laterSupported computer system:Windows compatible computer with a USB 2.0 portCPU/clock:•Pentium 4 1.4 GHz or fasterAMD Athlon 1.4 GHz or faster(or equivalent processor)Memory:•512 MB or more for Windows XP 32-bit and WindowsVista 32-bit1 GB or more for Windows XP 64-bit and Windows Vista64-bitNOTEAlthough this product has been checked for use withtypical computers that meet the above operatingrequirements, we cannot guarantee that it will operatewith all computers that meet these requirements.Please be aware that even under the same conditions,processing capability may vary depending on differencesof the design and system.Mac OS XSupported operating system:Mac OS X 10.4.11 or laterMac OS X 10.5.6 or laterSupported computer system:Apple Macintosh series equipped with a USB port asstandard equipmentCPU/clock:•Power PC G4 1 GHz or faster, or Intel processorMemory:•512 MB or moreInstalling the driverIn order to use the US-2000, you must install theappropriate driver into your computer. As described below,this is an easy process using the CD-ROM included withthe US-2000.Driver are updated from time to time. You can downloadthe most recent version of the driver from the TASCAMwebsite <http://www.tascam.com/>.Do not connect the US-2000 to your computer before youhave installed the driver.CAUTIONHandle the enclosed CD-ROM with care. If the disc•becomes scratched or dirty, your computer maybe unable to read it and the software cannot beinstalled. If the disc becomes unreadable, a fee willbe charged for its replacement.Never attempt to play the enclosed CD-ROM in a•conventional audio CD player, as the resulting noisemay damage your speakers or your hearing.Installing the driver for WindowsNOTEDuring driver installation, a warning that “this•software ... has not passed Windows Logo testing“will appear. This message appears when a driver thathas not received Windows Logo testing is installed.This message appears because the drivers for TASCAMproducts have not received Windows Logo testing.We have, however, confirmed their proper operation.If this message appears, click Continue to proceedwith the installation.During installation, you must connect, disconnect•and reconnect the unit in steps 7, 8 and 9. You shouldcomplete each of these installation steps in less thanone minute. Installation may fail if you take too muchtime.1 Confirm that the unit and the PC are not connectedby the USB cable.2 Insert the included driver installation CD-ROM intothe PC where you will install it.3 Click the “Install Driver” button when the screenbelow appears. (If this screen does not appearautomatically, find and open the “Autorun2.exe”program in the “Autorun” folder on the driverCD-ROM.)4 When the language selection screen (below) appears,select the language you prefer and then click the“OK” button.3 − Installation