Tascam US-2x2 Reference Manual

Also see for us-2x2: Reference manual Owner's manual Owner's manual Owner's manual Owner's manual

Tascam US-2x2 Reference Manual Manual pdf 13 page image

TASCAM US-2x2/US-4x4 136 – Using the Settings PanelOpening the Settings PanelYou can use the Settings Panel to make settings for the variousfunctions of the unit.Open the Settings Panel in the following manner.Windows8 Windows 10Click the Windows Start button and select All Programs wTASCAM w US-2x2 & US-4x4 Settings Panel.8 Windows 8.1Right-click the Windows Start button and select ControlPanel.NOTEYou can also left-click the Start button to open the Startscreen. Click the  button to open the Apps screen, andselect US-2x2 & US-4x4 Settings Panel under TASCAM.8 Windows 7Click the Windows Start button and select All Programs wTASCAM w US-2x2 & US-4x4 Settings Panel.Mac• Using the Finder, open the Applications folder and click“TASCAM US-2x2 & US-4x4 Settings Panel” to open theSettings Panel.• In the Audio Devices window of the Audio MIDI Setupapplication, right-click (control-click) “US-2x2” or “US-4x4”(or click the settings icon when the unit name is selected)and click “Configure device…” to open the Settings Panel.Settings Panel overviewOpen the Settings Panel if you want to use the unit with a DAWor other software for recording or other uses that require highperformance.123456Windows Settings Panel screen12456Mac Settings Panel screen1 Status display areaThis shows the current status of the software.Item displayed MeaningDriver Ver (Windows)Panel Ver (Mac)This is the software version.Device This is the name of theconnected unit.(“No Device” is shown when nodevice is connected.)Firmware Version This is the firmware version usedby the connected unit.Sample Rate This shows the samplingfrequency.i The sampling frequency canonly be set in the Windowsversion.Use the displayed valuepull-down menu to select thefrequency (44.1, 48, 88.2 or96 kHz).2 Direct Monitor SettingsInput 1-2 and Input 3-4 (US-4x4 only)Set the monitoring signal for the IN1-IN2/IN3-IN4 jacks to“Mono” or “Stereo”.o When set to “Mono”Stereo signals sent to the computer remain unchanged,but are output as mono signals from the LINE OUT(BALANCED) and PHONES ( 1 and 2 jacks on US-4x4)jacks.o When set to “Stereo”Stereo signals sent to the computer remain unchanged,and are output as stereo signals from the LINE OUT(BALANCED) and PHONES ( 1 and 2 jacks on US-4x4)jacks.