Tascam US-2x2 Reference Manual

Also see for us-2x2: Reference manual Owner's manual Owner's manual Owner's manual Owner's manual

Tascam US-2x2 Reference Manual Manual pdf 7 page image

TASCAM US-2x2/US-4x4 73 – Installation7. Read the contents of the License Agreement, and select“I accept the terms in the license agreement” if you agree tothe terms.Then, click the “Next” button.8. Next, click the “Install” button to start installation.9. The following screen appears when installation hascompleted.Click the “Finish” button.CAUTIONAfter installing the driver software, device driver installationwill be completed the first time the unit is connected to thecomputer by USB. At this time, Windows will automaticallysearch Windows Update, so it might take some time beforethe computer recognizes that the unit is connected. If thecomputer still does not recognize the unit after some time,open the software installer screen from the notificationarea at the bottom right of the computer display. Click “Skipobtaining driver software from Windows Update.” to stopthe search.Installing the Mac Settings PanelNOTE• Before starting to install the Mac Settings Panel, quit otherapplications.• While installing the Mac Settings Panel, a warning messagelike this might appear: “US-2x2_US-4x4 Installer.dmg” can'tbe opened because it was not downloaded from the MacApp Store.If a message like this appears, follow the instruc-tions in “Working with Gatekeeper” on page 8 and thenproceed with the installation.8 Mac Settings Panel installation procedures1. Download the Mac Settings Panel for the operating systemyou are using from the TEAC Global Site (http://teac-global.com/) and save it on the computer to be used with the unit.2. Double-click “US-2x2_US-4x4 Installer.dmg”, which is thesaved disk image file for the Mac Settings Panel, and double-click “US-2x2_US-4x4 Installer.pkg” inside the folder thatopens.NOTEDepending on the computer’s settings, the downloaded zipfile might not have opened automatically. In this case, openthe zip file first and then double-click the disk image file.3. When the installer starts, click the “Continue” button.4. Next, select the desired language and click the “Continue”button.