Tascam US-800 Owner's Manual

Also see for US-800: Quick start guide Release note

Tascam US-800 Owner's Manual Manual pdf 29 page image

TASCAM US-800 298 – Stand-alone modeOverviewWhen this unit is not connected to acomputer by a USB cable and the unit’s poweris ON (the included TASCAM PS-P520 ACadaptor is connected), the unit will operate instand-alone mode. In this mode, you can usethis unit as a microphone preamp withoutusing a computer.Settings for stand-alonemodeIn stand-alone mode, input signals passthrough the digital mixer, which is set to fixedvalues, and then the output selectors beforebeing output from the output jacks.MixerThe mixer settings are fixed at the followingvalues.Faders: All set at 0 dB•Pan: Odd channels are set to the left•channel and even channels are set to therightMute: All OFF•Solo: All OFF•Stereo link: OFF•Output selectorsOutput selector settings are fixed at thefollowing values.LINE OUT: 1/2•PHONES: MIXER•DIGITAL OUT: 3/4•Sample rateWhen the digital input is active, “Clock” is setto “DIGITAL” and the sample rate dependson the digital input. When the digital input isnot active, “Clock” is set to “Internal” andthe sample rate is set to “44.1 kHz“.