Tascam US-800 Owner's Manual

Also see for US-800: Quick start guide Release note

Tascam US-800 Owner's Manual Manual pdf 8 page image

8 TASCAM US-800Rear panel9 MIC/LINE INPUTS connectors(balanced)Use these combo jacks to connectbalanced analog microphones and linelevel inputs. Use the XLR connectorfor microphones (balanced) and thestandard jack (balanced) for keyboards,samplers and other line level devicesXLR (1: GND, 2: HOT, 3: COLD)•TRS (Tip: HOT, Ring: COLD, Sleeve: GND)•0 LINE OUT jacks (unbalanced)(1/2 or L/R)Use these RCA jacks for analog lineoutput (unbalanced). These jackscan output signals from a computerconnected by USB or the output of theinternal monitoring mixer, for example.Set which signals to be output froma computer using the US-800 controlpanel. Connect these jacks to a recorder,powered speakers or external effectprocessors, for example.In stand-alone mode the signals input byMIC/INST IN 1-2 are output from thesejacks.q DIGITAL IN connector (coaxial)This coaxial digital input jack conforms toIEC60958-3 (S/PDIF) specifications.NOTEThis unit is capable of input through its DIGITALIN jack at 24-bit/96 kHz.w MIDI IN connectorThis 5-PIN DIN is a standard MIDI inputconnector for inputting MIDI signals.e MIDI OUT connectorThis 5-PIN DIN is a standard MIDI outputconnector for outputting MIDI signals.r PHANTOM (+48V) switchUse this to turn +48V phantom power onfor mic input connectors 1-6.CAUTIONAlways set the PHANTOM (+48V) switch•to OFF before turning the unit’s power onor off (connecting or disconnecting the ACadaptor).Always turn the PHONES and MONITOR•knobs to the minimum volume beforechanging the switch between ON and OFF.Depending on the connected microphone,loud noises might be produced and damagecould be caused to equipment and people’shearing.Do not connect or disconnect a mic with an•input when this switch is ON.Turn this switch ON only when connecting•a condenser microphone that requiresphantom power.Do not supply phantom power to an•unbalanced dynamic microphone.2 − Names and Functions of Parts