3. CHANNEL MenuThis menu selection contains scanning preferences (either automatic or manual tuning),Channel, Auto Scan, Manual Scan, Channel Edit, Signal Information.Settings can be altered for individual channels.NOTE: Some menus areavailable only in DTV Modewhile recording is not inprogress.DescriptionPress the MENU button once to enter CHANNEL setup menu as shown above. Press OK to enterthe submenu. In the CHANNEL setup menu press the buttons to select the desired item. Pressthe MENU button to return to the previous menu. Press the EXIT button to exit.If Lock is enabled, Auto and Manual Scan are password protected. Key in the correct password.(Default password: 0000)Auto ScanPress OK to enter the auto scan option.Select the desired Country and Tune Typeusing the buttons, then press OK tostart scanning.NOTE:If ATV+DTV option is selected, the first 50%of the scan will be for ATV tuning, while thesecond half would be for DTV tuning. Ifdesired, the user has the option to exit thetuning process midway by pressing the EXITbutton.OSD MenuOSD MenuMultimediaOperationRecordingOperationMaintenanceand Service16Move MENU: Return EXIT: ExitSignal InformationChannel EditManual ScanAuto ScanChannelMove OK: Select MENU: Return EXIT: ExitStartMode DTVCountry AustraliaAuto Scan