May 2015 Service ManualPlatform ComponentsPart No. 1257106 GS-2669 BE • GS-3369 BE • GS-4069 BE 512-1PlatformHow to Remove the PlatformBodily injury hazard. Thisprocedure requires specific repairskills, lifting equipment and asuitable workshop. Attemptingthis procedure without these skillsand tools could result in death orserious injury and significantcomponent damage. Dealerservice is strongly recommended.Note: This procedure will require an overheadlifting device capable of supporting 1000 lbs /454 kg.1 Remove the cable ties that secures the powerto platform wiring to the bottom of the platform.Component damage hazard. Besure not to cut the power to theplatform wiring.2 Remove the clamp that secures the platformcontrols cable to the platform.3 Disconnect the platform controls cable fromthe connector located under the platform.4 Remove the platform controls from theplatform.Component damage hazard.The platform controls wiring canbe damaged if it is kinked orpinched.5 Remove the cover from the AC outlet. Tag anddisconnect the wiring from the outlet.Electrocution/burn hazard.Contact with electrically chargedcircuits could result in death orserious injury. Remove all rings,watches and other jewelry.6 Models with air line to platform option:Disconnect the air line from the platform. Pullthe air line free of the platform.7 Attach a sling chain from the overhead liftingdevice to the four lifting points on the platform.8 Remove the two carriage bolts that secure theplatform to the platform pivot at the steer endof the machine.
