Terex Genie Z-40N Operator's Manual

Also see for Genie Z-40N: Operator's manual

Third Edition • First Printing Operator's ManualInspectionsPart No. 1315875GT Z ® -40N • Z ® -40N RJ 31Pre-operation Inspection Be sure that the operator’s, safety, andresponsibilities manuals are complete, legibleand in the storage container located in theplatform. Be sure that all decals are legible and in place.See Inspections section. Check for hydraulic oil leaks and proper oillevel. Add oil if needed. See Maintenancesection. Check for battery fluid leaks and proper fluidlevel. Add distilled water if needed. SeeMaintenance section.Check the following components or areas fordamage, improperly installed, or missing parts andunauthorized modifications: Electrical components, wiring, andelectrical cables Hydraulic hoses, fittings, cylinders, andmanifolds Hydraulic tank Drive and turntable motors and drive hubs Boom wear pads Tires and wheels Limit switches and horn Alarms and beacons (if equipped) Nuts, bolts and other fasteners Platform entry mid-rail or gate Lanyard anchorage pointsCheck entire machine for: Cracks in welds or structural components Dents or damage to machine Excessive rust, corrosion or oxidation Verify that all structural and other criticalcomponents are present and all associatedfasteners and pins are in place and properlytightened. Be sure that both battery packs are in placeand properly connected. After you complete your inspection, be surethat all compartment covers are in place andlatched.