Terex Genie Z-40N Operator's Manual

Also see for Genie Z-40N: Operator's manual

Operator's Manual Third Edition • First PrintingInspections38 Z ® -40N • Z ® -40N RJ Part No. 1315875GTTest the Contact Alarm (if equipped)67 Do not activate the foot switch and press onthe contact alarm cable to release the actuatorfrom the switch socket.Result: The contact alarm lights will not flashand the machine horn will not sound.68 Activate the foot switch by pressing the footswitch down.Result: The contact alarm lights will flash andthe machine horn will sound.69 Insert the actuator into the switch socket.Result: The lights and horn will turn off.70 Activate the foot switch by pressing the footswitch down and press on the contact alarmcable to release the actuator from the switchsocket.Result: The contact alarm lights will flash andthe machine horn will sound.71 Operate each machine function.Result: All machine functions should notoperate.72 Insert the actuator into the switch socket.Result: The lights and horn will turn off.73 Operate each machine function.Result: All machine functions should operate.a actuatorb contact alarm cablec flashing alarmd switch socketTest Auxiliary Power74 Pull out the red Emergency Stop button to theon position.75 Press down the foot switch.76 Simultaneously hold the auxiliary power switchon and activate each function control handle ortoggle switch.Note: To conserve battery power, test eachfunction through a partial cycle.Result: All boom and steer functions shouldoperate. Drive functions should not operatewith auxiliary power.