Terex Genie Z-45/25 Operator's Manual

Also see for Genie Z-45/25 Bi-Energy: Operator's manual supplement Service manual Service and repair manual Operator's manual Service and repair manual

Operator's Manual Fourth Edition · First Printing48 Z-45/25 • Z-45/25J • Z-51/30J Part No. 114340SpecificationsStandard Base Models Z-45/25J (jib)Height, working maximum 16.07 mHeight, platform maximum 14.07 mHeight, stowed maximum 2.1 mHorizontal reach maximum 7.6 mWidth 2.29 mLength, stowed 6.83 mMaximum load capacity 227 kgMaximum load capacityModels with Aircraft ProtectionPackage 200 kgMaximum wind speed 12.5 m/sWheelbase 2.0 mTurning radius (outside) 4.5 mTurning radius (inside) 1.7 mTurntable rotation 355°Turntable tailswing 0 cmDrive speed, stowed 8.0 km/h12.2 m/5.5 secDrive speed, 1 km/hbooms raised 12.2 m/45 secAirborne noise emissions 73 dBMaximum sound level at normal operating workstations(A-weighted)Ground clearance, center 39.4 cmGround clearance, minimum 29.2 cmControls 12V DC proportionalWeight See Serial Label(Machine weights vary with option configurations)Platform dimensions, 6 foot(length x width) 1.8 m x 76 cmPlatform leveling self-levelingPlatform rotation 160 degreesVibration value does not exceed 2.5 m/s 2AC outlet in platform standardHydraulic pressure, maximum 221 bar(boom functions)System voltage 12VTire size, 4WD & 2WD RT 355/55 D625Tire size, High Flotation 33/16LL 500, 10 plyMaximum slope rating, stowed position, 2WDPlatform downhill 30% (17°)Platform uphill 25% (14°)Side slope 25% (14°)Maximum slope rating, stowed position, 4WDPlatform downhill 45% (24°)Platform uphill 25% (14°)Side slope 25% (14°)Note: Slope rating is subject to ground conditions andadequate traction.Fuel tank capacity 64.4 litersFloor loading informationTire load, maximum 3992 kgTire contact pressure 3.51 kg/cm 2345 kPaOccupied floor pressure (2WD) 957 kg/m 29.38 kPaOccupied floor pressure (4WD) 967 kg/m 29.48 kPaNote: Floor loading information is approximate anddoes not incorporate different option configurations. Itshould be used only with adequate safety factors.Continuous improvement of our products is a Geniepolicy. Product specifications are subject to changewithout notice or obligation.