U-Line H-7786 Manual
   |
PAGE 1 OF 3 0821 IH-7786H-7786, H-8258COLLABORATION TABLE –SINGLE WORKSTATION1-800-295-5510uline.comNOTE: Assemble on smooth, non-marringsurface to avoid scratching.NOTE: Use Allen wrench to tighten bolts.IMPORTANT! Check that all parts are included.1. Fit support rail over corresponding bracket on leg.Use four M6 x 12 mm bolts (D) to secure each side ofsupport rail. Repeat for remaining support rail.(See Figure 1)NOTE: Do not fully tighten bolts until assemblyis complete.2. With two people, place tabletop on assembled frame.Align tabletop with holes on legs. (See Figure 2)3. Attach tabletop to legs using threeM6 x 45 mm bolts (A) per leg. (See Figure 2)4. Attach tabletop to leg brackets using threeM6 x 15 mm bolts (B) per bracket. (See Figure 2)5. Attach tabletop to support rails using threeM6 x 60 mm bolts (C) per rail. (See Figure 2)6. Tighten bolts (D) installed in Step 1.PARTSASSEMBLYBolt x 6M6 x 45 mmABolt x 4M6 x 15 mmBBolt x 6M6 x 60 mmCBolt x 16M6 x 12 mmDTOOL NEEDEDAllen Wrench(included)Two Person AssemblyRecommendedPara Español, vea página 2.Pour le français, consulter les page 3.Figure 1Support RailLegDFigure 2TabletopACB |
Related manuals for U-Line H-258
manualsdatabase
Your AI-powered manual search engine