UGO BASILE 7025 Series Instruction Manual
                               | |
Contents
| 
Page 47025 Instruction Manual (Rev. 2)3.2 Notes on the Instruction ManualThe 7025 Instruction Manual included in the package (on the USB drive) is necessary forthe correct installation and operation of the instrument.We recommend reading the manual with attention, as it is essential for the correct instal-lation and operation of the instrument.Please save the manual, ready to be consulted by the qualified personnel who use theinstrument. Print it, only if necessary.Our Instruction Manuals are available as free download on our web, seehttp://www.ugobasile.com/support/documentation.html. For any additional informationand/or assistance, you are welcome to contact our Service Department (see paragraph5.4-Customer Support), specifying the serial number of your instrument.3.3 Before Applying PowerConsider the Power Module, on the in-strument back panel, which encompasses– from left to right - the inlet connection ofthe mains cord, the mains switch and thefuse holder.Figure 2 “Power Module”The Ventilator has Universal input 85-264 VAC, 50-60Hz.3.3.1 Mains SwitchThis two-pole toggle switch, which complies with international safety standards, providesa visual cue, meaning: OFF when pressed the “O” side ON when pressed to the “I” side3.3.2 Fuse HolderThe fuse holder comprises two fuses, one on the live, and the other on the neutral. Werecommend 800 mA timed fuses, type T800 A. To replace the fuses, see paragraph 5.1-Electrical.3.3.3 Mains CordIt is a standard cable, Cat. # E-WP008. Make sure your power outtake is provided with areliable ground connection, see also 3.4 & 3.5.3.4 ConnectionsConnect the mains cord to a power outtake, provided with a reliable earth connection. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine