UGO BASILE 7025 Series Instruction Manual
                               | |
Contents
| 
Page 57025 Instruction Manual (Rev. 2)3.5 Additional Safety Considerationa. Place your Ventilator on a steady flat surface.b. Do not obstruct free and comfortable access to the power module.c. Use original accessories and spare parts only, see also paragraph 8-ORDERING INFORMATION.d. Immediately disconnect and replace an accidentally damaged mains cable.e. Do not operate the Ventilator in hazardous environments or outside prescribedenvironmental limitations (i.e. 10°C / +40°C, 95% relative humidity, non-condensing), see also paragraph 7.4-INSTRUMENT SPECIFICATIONS.f. Do not spray any liquid on the connectors.g. Use only acceptable, commercially available anaesthetic agents with this ven-tilator.UGO BASILE DOES NOT ACCEPT ANY RESPONSIBILITY FOR PROB-LEMS ORHARM CAUSED TO THINGS OR PERSONS ARISING FROM: incorrect electrical supply. incorrect installation procedure. incorrect or improper use or, in any case, not in accordance with the purposefor which the instrument has been designed and the warnings brought to yourattention in the instruction manual supplied with the instrument. replacement of original components, accessories or parts with others not ap-proved by the manufacturer. servicing carried out by unauthorized personnel.4 OPERATION4.1 Switching OnSwitch on the 7025 Venti-lator by acting the MainsSwitch placed on the leftside wall of the instrument;see paragraph 3.3.1-MainsSwitch. The digital displaylabelled STROKES PERMINUTE will light up, de-noting that the instrumentis on.Familiarize with the strokeand rate control.Figure 3 “Front Panel” |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine