Ubiquiti AF-2X User Manual

Also see for AF-3X: User guide User guide User guide Quick start guide

Contents

Ubiquiti AF-2X User Manual Manual pdf 35 page image

29Chapter 9: System TabairFiber® X User GuideUbiquiti Networks, Inc.This is a three-step procedure:1. Click Choose File to locate the new firmware file. Selectthe file and click Open.2. Click Upload to upload the new firmware to theairFiber X radio.3. The Uploaded Firmware Version is displayed. ClickUpdate to confirm.If the firmware update is in process, you can close thefirmware update window, but this does not cancel thefirmware update. Please be patient, as the firmwareupdate routine can take three to seven minutes. Youcannot access the airFiber X radio until the firmwareupdate routine is completed.WARNING: Do not power off, do not reboot, and donot disconnect the airFiber X radio from the powersupply during the firmware update process as theseactions will damage the airFiber X radio!DeviceThe Device Name (host name) is the system-wide deviceidentifier. The SNMP agent reports it to authorizedmanagement stations. The Device Name will be used inpopular router operating systems, registration screens,and discovery tools.Device Name Specifies the host name.Interface Language Allows you to select the languagedisplayed in the web management interface. English is thedefault language.Date SettingsTime Zone Specifies the time zone in relation toGreenwich Mean Time (GMT).Startup Date When enabled, you are able to change theairFiber X radio’s startup date.• Startup Date Specifies the airFiber X radio’s startupdate. Click the Calendar icon or manually enter thedate in the following format: 2-digit month/2-digitday/4-digit year. For example, for January 5, 2014, enter01/05/2014 in the field.System AccountsYou can change the administrator password to protectyour device from unauthorized changes. We recommendthat you change the default administrator password wheninitially configuring the device.Administrator Username Specifies the name of theadministrator.Key icon Click this icon to change the administratorpassword.• Current Password Enter the current password forthe administrator account. It is required to change thePassword or Administrator Username.• New Password Enter the new password for theadministrator account.• Verify New Password Re-enter the new password forthe administrator account.Note: The password length is 8 charactersmaximum; passwords exceeding 8 characters will betruncated.Read-Only Account Check the box to enable theread-only account, which can only view the Main tab.Configure the username and password to protect yourdevice from unauthorized changes.• Read-Only Account Name Specifies the name of thesystem user.• Key icon Click this icon to change the read-onlypassword.- New Password Enter the new password for theread-only account.- Show Check the box to display the read-onlypassword characters.MiscellaneousReset Button To allow use of the airFiber X radio’sphysical reset button, check the box. To prevent anaccidental reset to default settings, uncheck the box.Note: You can reset the airFiber X radio to defaultsettings via the airFiber Configuration Interface. Goto the System tab > Reset to Defaults.