Ubiquiti AF-2X User Manual

Also see for AF-3X: User guide User guide User guide Quick start guide

Contents

Ubiquiti AF-2X User Manual Manual pdf 39 page image

33Chapter 10: ToolsairFiber® X User GuideUbiquiti Networks, Inc.• Launch airView Click Launch airView to download theJava Network Launch Protocol (jnlp) file and completethe launch of airView.Main ViewDevice Displays the device name, MAC (Media AccessControl) address, and IP address of the device runningairView.Total RF Frames Displays the total number of RadioFrequency (RF) frames gathered since the start of theairView session or since the Reset All Data button was lastclicked.FPS Displays the total number of frames per second (FPS)gathered since the start of the airView session or sincethe Reset All Data button was last clicked. The wider theinterval amplitude, the fewer the FPS will be gathered.Reset All Data Click to reset all gathered data. Use thisoption to analyze the spectrum for another location oraddress.File MenuClick Exit to end the airView session.View MenuEnable Chart Panel 1 (top) Displays the Waterfall orChannel Usage chart in Chart Panel 1, depending onwhich option you have selected in Preferences. Thistime‑based graph shows the aggregate energy collectedor channel usage for each frequency since the start of theairView session.Enable Chart Panel 2 (middle) Displays the Waveformchart in Chart Panel 2. This time‑based graph shows the RFsignature of the noise environment since the start of theairView session. The energy color designates its amplitude.Cooler colors represent lower energy levels (with bluerepresenting the lowest levels) in that frequency bin, andwarmer colors (yellow, orange, or red) represent higherenergy levels in that frequency bin.Enable Chart Panel 3 (bottom) Displays the Real‑timechart (traditional spectrum analyzer) in Chart Panel 3.Energy (in dBm) is shown in real time as a function offrequency.Note: Energy is the power ratio in decibels (dB) of themeasured power referenced to one milliwatt (mW).Clear All Markers Resets all previously assignedmarkers. Markers are assigned by clicking a point, whichcorresponds with a frequency on the Real‑time chart.Preferences Changes airView settings, such as enablingor disabling charts and traces, or specifying the frequencyinterval.PreferencesSelect View > Preferences to display the Preferences -airView Spectrum Analyzer window.