Ubiquiti AMPLIFI User Manual

Also see for AMPLIFI: User guide

Contents

Ubiquiti AMPLIFI User Manual Manual pdf 12 page image

8Chapter 1: Getting StartedAmpliFi User GuideAccessing Another AmpliFi RouterThe app accesses one AmpliFi Router at a time. If you want toset up or access a different Router, perform these steps:1. Log out of the current AmpliFi Router.2. When the Welcome screen appears, you will seetwo options: Setup AmpliFi and Already have a configuredAmpliFi? Proceed to the section below that correspondswith your selection.Set Up AmpliFiThis option allows you to set up and configure a new AmpliFiRouter. Tap Set Up AmpliFi and repeat steps 3 through 8from the “App Users” on page 3.Already have a configured AmpliFi?This option allows you to log into an existing AmpliFi Routerby performing these steps:1. Tap Already have a configured AmpliFi?2. When the app presents a list of detected AmpliFi Routerson the network, tap the Router you wish to log into.Start Wizard You may also restart the AmpliFi setup wizardby tapping the menu icon in the upper left corner andselecting Start Wizard. This option is only available if youare not logged into an existing AmpliFi Router.Router’s DisplayThe Router provides the following information as you tap thefront display:• Time and Date• Throughput• IP Addresses• SpeedFor configuration, refer to the AmpliFi app.Time and DateMOJUL 18AMPLIFIAM1137• Time Displays the time of day.• Day of the Week Displays the day of the week.• Date Displays the calendar date.