Ubiquiti Rocket Prism RP-5AC-Gen2 Quick Start Manual

Also see for Rocket Prism 5AC: Quick start guide Quick start guide

Connect the power using one of the following options:• Using the included Gigabit PoE Adapter: Go to Connecting tothe PoE Adapter.• Using a separate PoE switch: Connect the Ethernet cablefrom the Rocket Prism’s Ethernet port to a PoE-enabledEthernet port on the switch.WARNING: The switch port must comply with thepower specifications listed in the Specificationssection of this Quick Start Guide.Connecting to the PoE Adapter1. Connect the Ethernet cable from the Rocket Prism’s LANport to the adapter’s POE port.2. Connect an Ethernet cable from your LAN to the adapter’sLAN port.3. Connect the Power Cord to the adapter’s power port.Connect the other end of the Power Cord to a power outlet.Mounting the PoE Adapter (Optional)1. Remove the PoE Mounting Bracket from the adapter, placethe bracket at the desired location, and mark the two holes.2. Pre-drill the holes if necessary, and secure the bracketusing two fasteners (not included).3. Align the adapter’s slots with the tabs of the PoE MountingBracket, and then slide the adapter down.