Ubiquiti UVC-G3-AF User Manual
Also see for UVC-G3-AF: Quick start guide
                                                        |
41Appendix A: Mobile AppUniFi Video User GuideUbiquiti Networks, Inc.Icons below the Camera Detail screen provide thefollowing controls:Icon Name FunctionPause Tap to pause the live video stream. The iconchanges to the Play icon.Play Tap to resume the live video stream. The iconchanges to the Pause icon.Mute Tap to mute the camera’s audio. The iconchanges to the Unmute icon.Unmute Tap to unmute the camera’s audio. The iconchanges to the Mute icon.Microphone Two-way communication available on selectcameras (UVC-Micro and UVC-G3-Micro).The following control is located above the video screen:Enhance (Available only on select G3 cameras. TheG3 Pro will not support Magic Zoom). This feature letsyou set a camera’s view to a specific part of its full field ofview. After zooming in (pinch to zoom), tap this icon andthen tap Continue to make the zoomed-in view persist. Todisable the zoomed-in view and restore the camera’s fullfield of view, tap the icon again.Note: When Enhance is selected, the new view willapply to the following:• All live video from the camera.• All recorded video from the camera.• All motion zones for the camera.Below the icon bar, the following information is displayed:Camera Name Displays the name of the camera.Camera Settings Tap Camera Settings to access camerasettings:• Motion Alert Sound (Available on UVC-Micro andUVC-Pro only) Set to On to enable the camera’s motionalert sound, or set to Off to disable the motion alertsound.• Camera LED (Available on UVC-Micro only) Set to On toenable the camera’s LED, or set to Off to disable the LED.• Image Settings Tap Image Settings to access theImage Settings screen.IP Address Displays the IP address of the camera on thelocal network.Firmware Displays the firmware version installed on thecamera.Status Displays Connected or Disconnected.Record Mode Displays the recording mode: Off,On Motion, or Always. To change the setting, tap theicon and select the new setting.Record Resolution Displays the recording resolution:High, Medium, or Low. To change the setting, tap theicon and select the new setting.Recent Recordings Tap Recent Recordings to open aRecordings screen that lists recordings for the selectedcamera only.Image SettingsThe Image Settings screen lets you change the imagesettings for the live feed you are currently viewing. Toaccess this screen from the Camera Detail screen, tapCamera Settings and then tap Image Settings.Use the adjustment slider to modify each image property.The Image Settings window includes a live preview thatupdates as adjustments are made. Swipe the ImageSettings menu horizontally to see additional imagesettings. The image settings include the following:BRIGHTNESSBrightness Change the image brightness bymoving the slider control left or right, from 0(darkest) to 100 (brightest).50CONTRASTContrast Change the image contrast bymoving the slider control left or right, from 0(least contrast) to 100 (greatest contrast).50HUEHue Change the image hue by moving theslider control left or right, from 0 (red end ofspectrum) to 100 (purple end of spectrum).50 |
Related manuals for Ubiquiti UVC-G3-AF
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine