Ubiquiti UVC-G3 User Manual
Also see for UVC-G3: Quick start guideQuick start guideQuick start manualQuick start guideManual
                                                            | |
Contents
|
12Chapter 2: Cameras UniFi Video User GuideUbiquiti Networks, Inc.Timestamp Overlay Click to enable or disable thetimestamp from appearing on the live video feed.Watermark Click to enable or disable the visibility of thewatermark on the live video feed of the selected camera.RTSP ServiceRTSP (Real Time Streaming Protocol) is a network protocoldesigned for facilitating the playback of media files.HighEnable RTSP Service Click to enable the RTSP Service anddisplay the RTSP URL for the selected camera. The defaultsetting is OFF.• RTSP URL URL link to a camera’s live video stream. Youcan copy and paste this address into your web browserfor live viewing.MediumEnable RTSP Service Click to enable the RTSP Service anddisplay the RTSP URL for the selected camera. The defaultsetting is OFF.• RTSP URL URL link to a camera’s live video stream. Youcan copy and paste this address into your web browserfor live viewing.LowEnable RTSP Service Click to enable the RTSP Service anddisplay the RTSP URL for the selected camera. The defaultsetting is OFF.• RTSP URL URL link to a camera’s live video stream. Youcan copy and paste this address into your web browserfor live viewing.RecordingConfigurationRecord Mode Allows you to define the recording mode ofthe selected camera.• Don’t change This option only appears when multiplecameras are selected. Choosing this option keeps thecameras in their current recording mode.• Don’t record Nothing will be recorded by the camera.• Always record Enables the camera to record all thetime, regardless if there is motion detected or not.• Record only motion All captured images are analyzedand only recorded when motion is detected.• Record on schedule Allows you to set up a specificrecording schedule for each individual camera.Choosing this Record Mode will display a Scheduleoption. Click the Schedule drop-down menu to create anew schedule or select from a list of existing schedules.- New Schedule To create a new recording schedule,click and drag a block of time on each day you wouldlike the camera to record. When you are finished,click Save. You can also update or delete an existingschedule by clicking to view it in edit mode.Resolution Choose one of the following three resolutionsto use for the selected camera:• High High resolution• Medium Medium resolution• Low Low resolutionMotion DetectionZones Click Configure to edit motion zones for theselected camera. This option does not appear if multiplecameras are selected, as zones are configured individually.Minimum Motion Event Trigger Drag the slider controlleft or right to set the minimum duration (0 to 5 seconds)that motion must take place to trigger recording. |
Related manuals for Ubiquiti UVC-G3
manualsdatabase
Your AI-powered manual search engine