Ubiquiti UVC-G3 User Manual
Also see for UVC-G3: Quick start guideQuick start guideQuick start manualQuick start guideManual
                                                            | |
Contents
|
37Appendix A: Mobile AppUniFi Video User GuideUbiquiti Networks, Inc.Camera DetailThe Camera Detail screen displays a live video feedfrom the selected camera, as well as specific details onthe camera, including its name, status, IP address, andsoftware version.Icons located just below the Camera Detail screen providethe following controls:Icon Name FunctionPause Tap to pause the live video stream. The iconchanges to the Play icon.Play Tap to resume the live video stream. The iconchanges to the Pause icon.Enhance (Available only on G3 cameras.) This feature letsyou set a camera’s view to a specific part of its fullfield of view. After zooming in (pinch to zoom),tap this icon and then tap Continue to make thezoomed-in view persist. To disable the zoomed-inview and restore the camera’s full field of view,tap the icon again.Mute Tap to mute the camera’s audio. The icon changesto the Unmute icon.Unmute Tap to unmute the camera’s audio. The iconchanges to the Mute icon.Full-screenTap to toggle the video display between normalsize and full-screen display.Note: When Enhance is selected, the new view willapply to the following:• All live video from the camera.• All recorded video from the camera.• All motion zones for the camera.Note: Depending on your mobile device’s setup, theicon bar may contain additional icons not related tothe UniFi Video mobile app.Below the icon bar, the following information is displayed:Camera Name Displays the name of the camera.Camera Settings Tap Camera Settings to access camerasettings:• Motion Alert Sound (Available on UVC-Micro andUVC-Pro only) Set to On to enable the camera’s motionalert sound, or set to Off to disable the motion alertsound.• Camera LED (Available on UVC-Micro only) Set to On toenable the camera’s LED, or set to Off to disable the LED.• Image Settings Tap Image Settings to access theImage Settings screen.IP Address Displays the IP address of the camera on thelocal network.Firmware Displays the firmware version installed on thecamera.Status Displays Connected or Disconnected.Record Mode Displays the recording mode: Off,On Motion, or Always. To change the setting, tap theicon and select the new setting.Record Resolution Displays the recording resolution:High, Medium, or Low. To change the setting, tap theicon and select the new setting.Recent Recordings Tap Recent Recordings to open aRecordings screen that lists recordings for the selectedcamera only. |
Related manuals for Ubiquiti UVC-G3
manualsdatabase
Your AI-powered manual search engine