Connecting PowerFollow the instructions for the source of power that you areusing: Power over Ethernet or DC Power.Power over Ethernet1. Lift the release latch on the bottom of the AF‑11FX andslide the Port Cover off.2. Connect an Ethernet cable to the DATA port.3. Connect the Ethernet cable from the DATA port of theAF‑11FX to the POE port of the adapter.WARNING: Use only the included adapter, modelGP-C500-120G. Failure to do so can damage the unitand void the product warranty.

package contents

installation requirements

hardware overview

installation overview

connecting power

hardware installation

specifications

declaration of conformity

online resources

Ubiquiti airFiber 11FX Quick Start Manual

airFiber 11FX

Chapter 1: Overview

Chapter 2: Installation

Installing an Optional Duplexer (MIMO Mode)

Connecting Power over Ethernet

airFiber Configuration

Hardware Installation

Connecting Power

Alignment

Installer Compliance Responsibility

Chapter 3: Navigation

Interface

Chapter 4: Dashboard

Signal Strength

Ethernet

Chapter 5: Wireless Tab

Frequency Settings

Advanced Wireless Settings

Chapter 6: Network Tab

Data Port Ethernet Settings

Ethernet Carrier Drop Settings

Chapter 7: Services Tab

SNMP Agent

NTP Client

Chapter 8: System Tab

Device

Chapter 9: Tools

Discovery

file menu

Appendix J: Specifications

Appendix K: Safety Notices

Appendix L: Warranty

Appendix M: Compliance Information

RoHS/WEEE Compliance Statement

Appendix N: Declaration of Conformity

Appendix O: Contact Information

AF-11FX-H

AF-11FX-L