4mFi™ Wall Mount Motion SensorWall-Mount1. Use a 6 mm drill bit to drill two holes 20 mm apart withone directly above the other.20 mm2. Insert the anchors into the holes.3. Use a Phillips screwdriver to secure a M3x20 Screw tothe top anchor in the wall. Ensure to leave a clearanceof approximately 1 mm between the screw head andthe anchor.1 mm

package contents

hardware overview


Contents package contents hardware overview hardware installation specifications declaration of conformity	4mFi™ Wall Mount Motion SensorWall-Mount1. Use a 6 mm drill bit to drill two holes 20 mm apart withone directly above the other.20 mm2. Insert the anchors into the holes.3. Use a Phillips screwdriver to secure a M3x20 Screw tothe top anchor in the wall. Ensure to leave a clearanceof approximately 1 mm between the screw head andthe anchor.1 mm Previous Next / 24

Ubiquiti mFi-MSW Quick Start Manual