Ultra Start 45xx Series Owner's Manual

Also see for 45 SERIES: Install guide Owner's guide

Contents

Ultra Start 45xx Series Owner's Manual Manual pdf 4 page image

Page 4Idle Mode1. While the vehicle is running with key, press button #3.2. The park lights will turn on and the siren will chirp once.3. Turn the ignition key off and the vehicle will continue to run.4. Exit the vehicle and leave it running safely without leaving thekeys in the Ignition.Note: Always lock the doors while the vehicle is left runningunattended. The vehicle will stay running for theprogrammed runtime (Default 15 minutes)Turbo Timer ModeStatus Update1.While the vehicle is running with key, press button #4.2.The park lights will turn on and the siren will chirp once.3.Turn the ignition key off and the vehicle will continue to run forapproximately 2 minutes.Note: Always lock the doors while the vehicle is left runningunattended.This feature is used to check the status of the vehicle. If thesystem does not update the remote after completing a functionpress Button #4 on the transmitter. The remote will then display thecurrent status of the system on the LCD screen.If the system is out of operating range the remote transmitter willbeep three times quicky after a button is pressed. The antenna iconon the top of the LCD will be gone or show no bars next to the icon.1 2 3 41 2 3 41 2 3 4OWNER’S GUIDE 2way REMOTE STARTER/ ALARM