Unicla A Series Service Manual
                    | |
5.Service tool part numbersBolt torque specificationsNo. Description Part number1 Working assembly bench 03301- 00084A2 Stand, rear mount 03301- 0011703 Stand, front 03301- 00914A4 Hub remover, clutch 03301- 0005705 Pulley pad 03301- 0100506 Remover, lip seal 03301- 0011207 Installer, lip seal 03301- 0006008 Shaft rotating handle 03301- 0006109 Guide pin 03301- 00036010 Guide sleeve 03301- 00062011 Installer, pulley 03301- 00063012 Socket, 10mm 03301- 00064013 Socket, 6mm Hex 03301- 00065014 Clutch wrench 03301- 00066015 Torque wrench 03301- 00038016 Snap ring pliers (Shaft) 03301- 00043017 Snap ring pliers (Hole) 03301- 00042018 Remover, pulley 03301- 00041019 Plastic hammer 03301- 00039020 Thickness guage 03301- 000400Description Bolt diameter (mm) Tightening torque (N•m)Housing cap bolts M8 14.7 ± 1High/low service valve M12 11.7 ± 1Blind plugs M12 11.7 ± 1Clutch armature bolts M6 13.7 ± 1 |
Related manuals for Unicla A Series
manualsdatabase
Your AI-powered manual search engine