Uniden APCO 25 Owner's Manual

Contents

Uniden APCO 25 Owner's Manual Manual pdf 53 page image

475. Select the channel to store the information into.2:TRUNK CHANNELUse the scroll bar to select a channel within the bank to store a system frequency, thenpress E.6. Store the channel information1:FREQUENCYEnter the frequency for the channel, then enter an Alpha Tag for the channel.Repeat Steps 5 and 6 to store the rest of the frequencies for the system. Then, see“Programming Talkgroups.”Programming Type I and IIi Hybrid SystemsTo program a Type I or IIi Hybrid system, you need to know the system’s fleet map inaddition to the frequency information for the system. Fleet map information is usuallyprovided with the frequencies for the system.1. Select the trunk programming mode.2:SCAN OPTION → 2:TRUNK2. Use the scroll bar to select the bank you want to program, then press E.1:TRUNK TYPE → 1:ON3. Select the following trunk type for Motorola Type I Systems:2:TYPE1Motorola Type I and IIi Hybrid Systems4. Enter the fleet map information.Your scanner has the most common fleet maps preprogrammed. Refer to Appendix for acomplete list of these fleet maps.Use the scroll bar to select the preprogrammed fleetmap 1-16 or, if the fleet map doesnot match a preprogrammed set, select USER CUSTOM. Then, use the scroll bar toselect the size code for each block.5. Select the channel to store the information into.2:TRUNK CHANNELUse the scroll bar to select a channel within the bank to store a system frequency, thenpress E.6. Store the channel information1:FREQUENCYEnter the frequency for the channel, then enter an Alpha Tag for the channel.Repeat Steps 5 and 6 to store the rest of the frequencies for the system. Then, see“Programming Talkgroups.”