Uniden PRO5050 User Manual

Also see for PRO5050: Manual

Mounting the MIC Hanger13UNIDEN PRO5050 AM-CB TransceiverConventional Mounting with Double Sided Tape(not supplied)High quality Double-Sided tape can be found at good retail stores.Secure the front and back pieces of the MIC Hanger using the supplied binding screws.Locate a suitable mounting position.Apply high quality Double-Sided tape onto the flat area of the MIC Hangerback piece and then press firmly to the mounting position.The Microphone Hanger comes in two parts. How and where you mount the MIChanger will determine which parts to use.Conventional Mounting with ScrewsUse the front part of the MIC Hanger only.Locate a suitable mounting position and mark and drill two 3mm holes.Fix the MIC Hanger into place with screws.