Uniden PRO5050 User Manual

Also see for PRO5050: Manual

Operation15UNIDEN PRO5050 AM-CB TransceiverSetting the Manual SquelchTurn the rotary of the SQ control at the base to adjust the Squelch.NOTEYou must select a channel which is not in use before setting theSQUELCH control. (see p.16 for “Selecting a Channel”).Think of the squelch con-trol as a gate. If you turnSquelch fully clockwise itraises the‘Squelch gate’so high that no signals getthrough.If you turn Squelch fullycounter clockwise it low-ers the ‘Squelch gate’so low that noise getsthrough.To set the ‘Squelch Gate’to the desired level,turn the squelch knobcounterclockwise until youhear noise. Then care-fully turn the Squelch knobclockwise until the noisefades. Now only strongsignals get through.MonitorPress and hold [DUAL/MON] at the base to open thesquelch and receive all weak signals. Press and hold[DUAL/MON] at the base to cancel.