3GETTING STARTEDBATTERY INSTALLATIONYour UH060SX-2 unit uses the included NiMH battery pack forpower. The unit can be powered with optional 4 AAA ALKALINEbatteries.To avoid damage to the unit do not mix old andnew batteries.Do not charge alkaline or non rechargeablebatteries.Uniden does not represent this product to bewaterproof. Do not expose this product to Rain orMoisture.If you don't use the UH060SX-2 for long periods,Uniden recommend removing the batteries. TheUH060SX-2 is designed to retain the previous usersettings. This feature will continue to use a smallamount of battery power while the unit is switched off.To install the batteries:1. Make sure your radio is off.2. Release the battery cover clip, thenremove the battery cover.3. Insert NiMH battery pack accordingto the orientation on the batterypack.OR Insert 4 AAA ALKALINE batteries (notincluded) according to the polaritysymbols inside the batterycompartment.4. Align the battery cover tabs with theUH060SX-2 tab holes then replacethe cover clip.UT928ZH_UH060_ENG_0929 9/29/04 3:26 PM Page 3