Uniden UH5045 Owner's Manual

Also see for UH5045: Manual

Uniden UH5045 Owner's Manual Manual pdf 20 page image

Operation20UNIDEN UH5045 UHF CB TransceiverProgramming the Instant Priority ChannelTurn the Rotary Channel Selector at the base or presson the optional Remote SPK/MIC to select the Priority Channelyou prefer.Press and hold [INST] button on the microphone for 3seconds to store the new setting. INST icon appears.Recalling the Instant ChannelMomentarily press the [INST] button on the microphone atany time to return to the Instant Channel.TransmittingThe UHF CB Radio uses the UHF-CB Channels.NOTEFor your reference a list of the available channels, correspondingfrequencies and guidelines for their use and selection is printed on p.31 -p.33. For Australia, Channels 05 and 35 are reserved for Emergency Calls.Select the desired channel. Press the microphone’s [PTT] button and speak normallyinto the microphone. Hold it approx. 7cm from your mouth. Release the [PTT] button toend the transmission and listen for a reply.Call FunctionPress the microphone [CALL] Button. A three second ringing tonewill be transmitted.You may select from 5 types of tones (see p.26).NOTECurrent regulations require calling tones to be restricted to onetransmission per minute. If a second transmission is attempted withinone minute then an error tone will sound.DUAL WatchDual watch monitors the current channel and the Instant channel. (See Programmingthe Instant Priority Channel above).Press [DUAL/MON] on the base or press and hold [DCS/CTCSS/DUAL] on theRemote SPK/MIC. DUAL icon appears and a short tone beep is heard.To cancel DUAL Watch press [DUAL/MON] on the base or press and hold[DCS/CTCSS/DUAL] on the Remote SPK/MIC. DUAL icon disappears.PTTCALL INST