Connecting the Microphone10UNIDEN UH8080S UHF CB TransceiverMIC JackBefore connecting the Microphone Jack decide if you need to use the 2 metreExtension Cable - simply connect the MIC plug into the jack end of the ExtensionCablePush the MIC plug or Extension Cable plug into the MIC jack of the radio until theconnection locks into place. Gently tug the MIC or Extension Cable cord to test that theconnection is locked. Use the rubber cover which is on the cord to seal the MIC jackentry from dust.Disconnecting the MIC from the MIC JackPull back the rubber cover and move it down along the cord. Using the flat blade of ascrewdriver or similar object carefully push the lock tab of the MIC plug towards theMIC cord and at the same time tug on the MIC cord to draw back the MIC plug.Mic Jack forRemote LCDSpeaker MicSpare (covered)for optionalMic Jack