Uniden uh043sx-2 Operating Manual

Also see for uh043sx-2: Brochure

Contents

(8)REPLY DELAYWhile scanning, the uh043sx stops at a busy channel and receives atransmission. When the received signal is over, the unit will wait for 2seconds for the return of the signal, otherwise, the radio resumes scanning.TO OPERATE IN DUPLEX MODE (REPEATERS)The Duplex function enables you to access local repeater stations. You canonly activate Duplex from CH01-CH08.UHF CB Repeaters are used to retransmit or relay your signal. Repeaters willextend the range of your radio and overcome the shielding effect caused bysolid obstructions.Contact your retailer for a list of repeaters available inYour area.Operation with the aid of a Repeater1. Press select/ key six times. P appears on the display.2. Press or to change o to .3. Press select/ to confirmTo deactivate the duplex operation repeat activation process and change too. uh043sx will return to normal operation.If or key is pressed when the channel is not from Ch01 -Ch08, an error tone sounds.P