113Witness or tape connectionDuring a call a previously determined participant can be prompted to enter thecall as a “witness” via a programmed “Request silent monitor” function key. Thethird participant in the call is not informed of the connection of the “witness”. Thewitness can not participate in the call, only listen in.Requirement: The witness or tape connection is set up on your system and theprogrammed “Request silent monitor” function key is set up on your phone. Youare conducting a call. “Private call” must be deactivated.Press the programmed “Request silent monitor” function key briefly twice. A spe-cial ringtone sounds on the phone of the “witness” and the message “Witness ortape connection” is shown on your display and that of the “witness”.^ The “witness” lifts the handset,orpresses the line/function key on which the call is being carried out.The “witness” can now listen in to the call unnoticed.DeactivatingPress the programmed “Call transfer” function key. The LED goes out. A call isagain signaled on the phone.Please take note of the applicable data protection regulations for the con-figuration and use of witness or tape connection.Request silent _Line 1 £Only the “witness” can end the silent monitoring by hanging up or pressingthe line key.Call transfer _
