76 Making calls in the team/executive/secretary configurationPlacing a call on hold on a trunk key and retrievingthe held callPrerequisite: You are conducting a call via one of your group’s trunks. The"Hold" key has been programmed on your telephone Page 52.HoldS Press the "Hold" key.if nec.\ or s Replace the handset or press the disconnect key.Depending on the configuration (contact your service personnel), this may benecessary so other team members can also pick up the call on hold.Retrieving the callT Press the trunk key flashing slowly.Making calls on multiple lines alternatelyPrerequisite: You are conducting a call via one of your group’s trunks. Anothertrunk key is flashing.T Press the flashing trunk key. The first call party is on hold on the other trunk.T Press the trunk key flashing slowly. The second call party is on hold.You can switch between lines as often as you wish. Press the trunk key flashingslowly each time.MULAP conference releaseIf configured (consult your service personnel), you can program a sensor key onyour phone with the function "MULAP Privacy Release" Page 52. The defaultlabel is "Priv Release".If you program this key, you do not have to use the menu to set up a conference.Your team partner only has to press the flashing trunk key associated with yourtrunk on his or her phone to immediately join the conference.[ You are conducting a call.S Press the "Priv Release" key. The LED lights up.Up to three team members can now join the conference.Prerequisite: The trunk on which you are speaking is configured on the otherphone as a trunk key.T Press the flashing trunk key.
