VX1305 Servers7017 6300–005 6–9Configuration Guidelines VX1305Table 6–7 lists guidelines for configuring VX1305 servers. Figure 6–2 shows theconnection from a VX1305 server to the CIOM card in the CEC module or to the PCI Thrucard in channel racks.Table 6–7. Configuration Guidelines, VX1305 ServersArea Rule/RecommendationWindows NT ConnectionPackagesSee Table 6–5 for details.Processor Addition One additional processor may be added to a maximum of two per server. SeeTable 6–3 for details.Disk Addition Additional disk may be added to a maximum of three per server. See Table 6–1for recommendations.Memory Additions Three increments of 256 MB can be added to a memory board. See Table 6–4.PCD Generation Refer to Appendix B of the A Series and ClearPath HMP NX Systems I/OHardware Configuration Guide (7008 6087) for information on PCDgeneration.Serial 1UUKMLPTSer 2Ser 1 Vid LAN0627ASerial 2 Server A7019 7488-001(CSB3-10C)Remaining Servers7019 7488-002(CSB3-15C)To CS Bus in CEC or PCIThru card in channel racksFigure 6–2. VX1305 Server CS Bus Cable Connection
