Unitech MS100 User Manual
Also see for MS100: SpecificationsUser manualQuick start guide
                                                           | |
Contents
| 
16 MS100 ManualBar Code Symbologies, continuedCode 128Enabled toggles the ability for the keyboard/scanner to readCode 128 on or off. Default is “Yes”.•Code ID is a user-definable identification letter for Code 128,which is referred to in the “Use Code ID” function (see page 11).Default is letter “K”.•Minimum Length defines the minimum length the user willaccept for a valid bar code. Default is “1”.•Maximum Length defines the maximum length the user willaccept for a valid bar code. Default is “64”.•EAN 128Field Separator is a user-definable character to insert betweenfields. Default is “None”.•Enable Code ID determines whether or not to assign a Code ID.Default is “No”.•Code ID is a user-definable identification letter for EAN 128,which is referred to in the “Use Code ID” function (see page 11).Default is “None”.•Enabled toggles the ability for the keyboard/scanner to read EAN128 on or off. Default is “No”.•Code 32Enabled toggles the ability for the keyboard/scanner to readCode 32 on or off. Default is “No”.•Code ID is a user-definable identification letter for Code 32,which is referred to in the “Use Code ID” function (see page 11).Default is letter “T”.•Send Leading Character toggles sending or not sending aleading (“start bar code”) character. Default is “Send”.•Send Tailing Character toggles sending or not sending a tailing(“stop bar code”) character. Default is “Send”.• |
Related manuals for Unitech MS100
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine