40 © 2015 unitech Electronics Co., Ltd. All rights reserved.unitech is a registered trademark of unitech Electronics Co.,Ltd4.7 Sensitivity of Continuous ReadingModeA. Quick SettingFast *SlowB. Same Code Delay Reading IntervalFollowing code sequences represent the length of time before a barcode canbe rescanned at continuous and flash reading mode. The value can bedefined from 1-50 and they represent 100ms to 5 seconds in100ms interval.Default value is 3 (0.3 seconds).To setup same code delay reading interval:1. Scan the "Begin" label2. Go the Numeric Bar Codes in Appendix A, Scan label(s),that representsthe same code delay reading interval. They are ranged form 1-50.One stepis represented 0.1second.So the interval is from 0.1 to 5 seconds.3. Scan the "Complete" labelRepeat the steps 1-3 to set time out of same symbol1. Begin 3. Complete2. Numeric BarCodes (Appendix A)
