8Battery ChargingThe imager contains a 1000mAh Lithium-Ion rechargeablebattery. A full charged battery will provide up to 15,000 scansover a 12 hours period. Actual charge life on the imager willdepend on the configuration of how the imager is configuredvia the programmable feature in this manual; in particular,Deep Sleep Mode settings can impact battery life.When the imager is placed in the cradle, the battery willautomatically charge. While charging is taking place, thecharging LED (marked with a battery symbol) will blink green.When the battery is fully charged, the charging LED will stayon a solid green.If there is an error in charging either with a failure in thecharging circuit or with a failure of the battery, the chargingLED will flash red. When this happens, the battery needs tobe replaced.