Unitech MS840B User Manual
Also see for MS084: User manualUser manualUser manual
                                                               | |
Contents
| 
3. Place the scanner in the cradle. Thescanner LED will be red to indicatecharging. When the scanner is charged,the LED will turn off.Cradle Mode, ConnectionCradle Mode (with SCM support)In order to establish a proper connection between your computer athrough a cradle, we suggest that you follow these step-by-step innd a scannerstructions:S232, or PS2 port of your computerrespectively with a USB cable, RS232 cable, or PS2 cable.USB cable will operate as HID device (keyboard)4. Determine that the power LED on the cradle is bright in solid green and thecommunication status LED on the cradle is bright in solid blue.5. By default, the MS840 operates in cradle mode. Thus, by using at most 3scanners, scan the Cradle Address barcode on the bottom side of the cradle.should turn off and beep shortly one time with a high tonee cradle should flash in blue.7. rrect connection of scanner andThe Cradle Address barcode is on the bottom side of the cradle.1. Ensure the cradle powered, check the Power LED.2. Turn on your computer.3. Connect the cradle to the USB, R6. The scanner LEDand the communication status LED on thThe Pager button can be used to verify cocradle.8 |
Related manuals for Unitech MS084
manualsdatabase
Your AI-powered manual search engine