Unitech MS840B User Manual

Also see for MS084: User manual User manual User manual

Unitech MS840B User Manual Manual pdf 34 page image

* Scan “B7” to end* Scan “Exit” to exit setupThere is only total 24 characters space available for defining theseone of the labels has been defined for the output with 24 charactersthree labels. If, the other twolabels cannot be defined further.Quick SetupAppendix A has a quick setup chart, which gives you one-label-for-one-functionup the scanner, locate the label with theconvenience to set up the scanner. To setfunction you want and scan that label.Batch SetupIf you need to configure more than one scanner, you may duplicate the settings ofcan do this by producing a set of customanner, and by scanning these labelsother scanners.ump Settings” label. Before you scan the label,bology,tot he thethe scanner (master) to the others. Youerived from the master scsetup labels dconfiguring theThe following label is called “Dplease open a text editor application (such as Notepad, Word, etc.). Scan thefollowing label and the settings of the scanner will dump to the screen as one orseveral ASCII string(s). Use a barcode printing software, select Code 39 symand use the string(s) to generate barcode labels. You use this batch setup labelsduplicate setting o t o r scanners.Dump3.F1>”.”.PC/AT, you have the following strings:J8SettingsIf you have settings as follows:* Device Type is “Keybaordless Wedge”.digit of UPC-A and EAN-1* Do not send the checkamble as “<* Define Pre* Define Postamble as “* Define Label 0 as “START”.When dumping settings on a...I800C06D51D08080A0O7C005354415254.Print into Code 39 bar code labels:. . . I 8 0 0 C0 6 D5 1 DJ 80 8 0 8 0 A0 O7 C0 0 5 3 5 4415254.22