Unitech MS910 User Manual

Also see for MS910: User manual Quick guide Quick guide User manual Quick guide

Unitech MS910 User Manual Manual pdf 9 page image

5Unitech electronics co., ltd.5F., No.135, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)y Tel: + 886 2 89121122 y Fax: +886 2 89121810 y website: www.ute.comChapter 2Installation and ConnectionConnecting (Pairing) the Scanner to a Host PCPlease make sure your PC or Smart Phone has a built-in wireless adaptor; the MS910supports both HID and SPP wireless profiles. If you are connecting it to an iOS (Apple) smartphone, please follow the instruction of “Connecting via Human Interface Device (HID) Mode”; ifyou are connecting it to an Android smart phone, please follow the instruction of “Connectingvia Serial Port Profile (SPP) Mode”Connecting via Serial Port Profile (SPP) Mode1. Turn on the wireless device on your host.2. Scan [Disconnect] barcode.3. Press the trigger for 1 second to activate the scanner.SPP4. Scan the [SPP] barcode below:5. The scanner will emit 8 beeps.6. Conduct a search for the MS910 on your host. Select “Wireless Scanner” from discovereddevice list and the scanner will beep twice.7. Enter pincode, which is “1234” by default.8. Open serial communication software with com port (see Device Manager) properly set up.9. The scanner will beep twice and the indicator LED will turn off to verify the successfulconnection.Connecting via Human Interface Device (HID) Mode1. Turn on the wireless device on your host.2. Scan [Disconnect] barcode.3. Press the trigger for 1 second to activate the scanner.4. Scan the [HID] barcode below:HID5. The scanner will emit 8 beeps.6. Conduct a search for the MS910 on your host PC. Select “Wireless Scanner” fromdiscovered device list and the scanner will beep twice.7. The wireless application may prompt you to scan a pincode it generated.