Unitech MS916 User Manual
Also see for MS916: User manualQuick start guideUser manualQuick start guideQuick start guide
                                                                                                      | |
Contents
| 
- 9 -1.7 Display Menu TreeTo enter main menu of MS916, press and hold Page Down button and thenpress Page Up button. You will see the following screen on the MS916 display.Now you can use Page Up/Down button to scroll through the menu and useScan button to make your selection.You can access the desired function refer to the Display Menu Tree below.TopMenu Sub Menu Level 1 Sub Menu Level 2 Options/Result Default Setting1. Scanner Type BT HID/USB SPP/BT SPP/BT SPP (Slave) BT HID2. Operation Mode Auto/Wedge/Batch Auto3.1 View Date/Time Show date and time N/A3.2 Set Date/Time SET DATE/SET TIME 2015-01-0108:00:003.3 Time Display Auto/Always Auto3. Date/Time3.4 Exit Return to the previous menu N/A4.1 Power Saving Disable/30/20/15/10/5 Sec. 15 Sec.4.2 Auto Power Off Disable/30/20/15/10/5/3/1 Min. 5 Min.4. Power Manager4.3 Exit Return to the previous menu N/A5. Setup By Label Enable/Disable Enable6. FAC Default 6.1 Restore to FAC Default? Yes/No No7. FW Version Show Firmware Version V0.51GeneralSetting8. Exit Return to the previous menu N/A1. Buffer Data 1.1. Erase Previous Buffer Entry? Yes/No No2. Data Terminator CR/None/TAB/CRLF/LF CRData &Memory3. Sending BlkDly 500 ms / 100 ms/ 50 ms / 10 ms/ 3 Sec. / 1 Sec. 10 ms |
Related manuals for Unitech MS916
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine