Unitech PA500II Quick Reference Manual

Also see for PA500II: User manual User manual

Contents

10 Speaker 11 Battery release latch12 Reset button 13 Main battery14 Universal connector 15 Right scanner trigger key16 StylusInstalling the BatteryWARNING! There is a risk of fire and burns if the battery pack is handledimproperly. DO NOT disassemble, crush, puncture, short externalcontacts, or dispose the battery pack in fire or water. DO NOTattempt to open or service the battery pack. Dispose of usedbatteries according to the local recycling guidelines in your area.A backup battery cell is embedded into your device to prevent data loss whenthe removable battery pack is removed or completely discharged. The backupbattery will keep the data and system settings up to 1 hour if the main battery isremoved.NOTE: To enable the internal battery cell to provide backup power supply,charge your device with the main battery pack for at least three and ahalf hours.1. Position the battery pack, making sure the battery pack fits the shape ofthe battery compartment.2. Slide the battery pack into the battery bay. The battery pack locks to thechassis with an audible click.3. If you remove the main battery and plug it back before the backup batterylost power, PA500II will be warm start.4. If you remove the main battery and plug it back after the backup batterylost power, PA500II will be clean booted.Copyright 2011 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.