Unitech PA550 User Manual

Also see for PA550: Quick reference guide

15To launch the Scanner Control Panel, follow these instructions.1. Tap Start → Settings → System2. Tap the Scanner icon. TheScanner Control Panel appears.NOTE: Or press Func key and “7”button simultaneously to bringup the Scanner Control Panelscreen.In the Scanner Control Panel screen, you can configure barcode scannerparameters such as enabling or disabling barcode symbologies, setting datatransmission options, configuring magnetic and proximity reading options, andsetting power management options. See the section of Barcode Symbologies.To test the barcode laser scanner, follow these instructions.1. Tap the Test tab to activate the demo program.2. Tap Tools → Enable Scan.Or tap Tools → Auto-Scan →Start Auto-Scan.Define the scan interval. Tap Start.3. Aim the laser scanner at theselected barcode, and presseither one of the scanner triggerbutton on the device.If you enable Auto-Scan, you don’thave to press any button. Aim thelaser scanner at the selectedbarcode while the laser emits lightat regular intervals v.The scanned barcode dataappears on the screen.4. Tap Tools → Auto-Scan → Stop Auto-Scan.