98Bluetooth pairing with the uMicPut uMic into pairing mode:If the uMic has never been paired before,pairing mode will be automatically activatedafter turning it on.To manually start pairing mode:1. Switch the uMic off.2. Press and hold the volume upbutton ( ).3. Turn the uMic on while stillpushing the ( ) button.4. Release the ( ) button aftertwo seconds when the indicatorlight rapidly blinks blue.5. Make sure the streamer and uMic are within1 m (3 ft) range of each other.The uMic will remain in pairing mode for twominutes or until the pairing is completed.Turning the uMic on and offSlide the power switch( ) as shown to turnthe uMic on or off.Sleep mode:If after 30 minutes no streamer device is foundthe uMic will power down to save battery lifeeven if the power switch is in the on position.To recover from sleep mode, switch the uMic offand turn it on again.On Off

Unitron uMic Manual

thank you

Getting started

Turning the uMic on and off

Pairing the uMic with uDirect 2

Connecting the uMic and uDirect 2

Functional test of uMic

Wearing the uMic correctly

Switching the uMic off

Troubleshooting guide

Warnings

Compliance information

Information and explanation of symbols

transport and storage conditions

uMic

Your uMic at a glance

turning the umic on and off

Charging the uMic

Setting the uMic volume

uMic and phone calls

uMic streaming distance

Use of the lanyard