V2 AYROS Series Installer Manual
Also see for AYROS series: Manual
                             | |
Contents
| 
ENGLISH- 50 -14 - TESTING AND START-UPIn implementing the automation device, these are the mostimportant steps for guaranteeing maximum safety.V2 recommends the application of the following technicalstandards:• EN 12445 (Safety in the use of automated closures, testmethods)• EN 12453 (Safety in the use of automated closures,requirements)• EN 60204–1 (Safety of Machinery, electrical equipment ofmachines, part 1: general principles)In particular, with reference to the table in the section“PRELIMINARY CHECKS and IDENTIFICATION OF THE TYPE OFUSE” in the majority of cases, it will be necessary to measure theimpact force, in accordance with the provisions of EN 12445.Adjusting the operating force is possible by programming theelectronic circuit board, and the impact force profile should bemeasured using an appropriate device (itself also certified andsubjected to annual calibration) capable of tracing the force-timegraph.The result should be in compliance with the following maximumvalues:15 - MAINTENANCEMaintenance should be performed in full compliance withthe safety instructions described in this manual and inaccordance with current legal and regulatory provisions.The recommended interval between each maintenanceoperation is six months, the checks involved should at leastrelate to:• the perfect efficiency of all warning devices• the perfect efficiency of all safety devices• measurement of the gate operating forces• the lubrication of mechanical parts on the automationdevice (where necessary)• the state of wear of the mechanical parts on theautomation device• the state of wear of the electrical cables on theelectromechanical actuatorsThe result of each check should be recorded in a gatemaintenance log.16 - DISPOSAL OF THEPRODUCTAs for the installation operations, even at the end of thisproduct’s life span, the dismantling operations must becarried out by qualified experts.This product is made up of various types of materials:some can be recycled while others need to be disposed of.Find out about the recycling or disposal systems envisagedby your local regulations for this product category.Important! – Parts of the product could containpollutants or hazardous substances which, if releasedinto the environment, could cause harmful effects to theenvironment itself as well as to human health.As indicated by the symbol opposite, throwing away thisproduct as domestic waste is strictly forbidden. So disposeof it as differentiated waste, in accordance with your localregulations, or return the product to the retailer when youpurchase a new equivalent product.Important! – the local applicable regulations mayenvisage heavy sanctions in the event of illegal disposal ofthis product.1400 NL > 500 mm400 NL = 50 ÷ 500 mm150 N25 N0.75 s5 sDynamicIMPACT forceStatic CRUSHINGforceTimeForce |
Related manuals for V2 AYROS series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine