VACBOT myVacBot B100 User Manual
                        | |
1919 SETTING ID WITH MAIN UNITPurpose:If lost or buy new one of charging base, sonic wall, remote control. You need setting ID into new unit forcommunication with myVacBot B100.How to set up an ID (Status of main unit indicator lamps when studying):ChargingStation 2ChargingStation 1RemoteControlSonic Wall 1Sonic Wall 2Sonic Wall 3Light up --> means the ID has been used alreadyLight off --> means the ID has not been used yetTip:Each one main unit at most can be equipped with one remote control, two charging stations and 3 sonicwalls at the same time.Steps:1. Let the Main Unit Into Studying ModePush the power Button on the main unit. Then press the Start/Stop button all the time, untilheard “DI-DI” sounds and the display panel shows Cd .This means the main unit has turned into study mode already.2. Let the Charging Station Start to StudyThere are two and display symbols to locate two charging stations.If any of these symbols does not light up, please follow the steps to set up your ID.Step 1: Power on the Home Base.Step 2: Press the time setting button all the time until you hear “DI-DI” sounds and one of the twobuttons light up (symbol must light off before). It means the Home Base has complete the study.Note:If the two symbols are all light up (before you start setting), please clear previous ID of the MainUnit.【【 |
Related manuals for VACBOT myVacBot B100
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine