VADDIO RoboSHOT 12 Installation And User Manual

Also see for RoboSHOT 12: User guide Installation and user guide Installation and user guide Installation and user guide Release Notes & Update Instructions

VADDIO RoboSHOT 12 Installation And User Manual Manual pdf 20 page image

RoboSHOT HD CamerasRoboSHOT HD Cameras- Document Number 342-0794 Rev C Page 20 of 44 Iris: Move adjustment slider as required to adjust the iris opening. A numeric value will be displayed in thebox to the right of the slider. Gain: Move adjustment slider as required for amount of iris gain desired. Numeric value will be displayedin the box to the right of the slider. Auto White Balance check box: When checked, camera will operate in Auto White Balance mode, whenunchecked camera will be in Manual White Balance Mode and allow for adjustment of Red and Blue Gain. Red Gain: Move the adjustment slider as required for amount of Red Gain desired. A numeric valuewill be displayed in the box to the right of the slider. Blue Gain: Move the adjustment slider as required for amount of Blue Gain desired. Numeric valuewill be displayed in the box to the right of the slider. Back Light Compensation: When checked, Back Light Compensation will be applied to the camera ifcamera is in Auto White Balance mode. Detail: Move the adjustment slider as required for amount of detail (Aperture) desired. A numeric valuewill be displayed in the box to the right of the slider. Note: If the detail is too high, the video can look grainyand appear noisy too. Chroma: Move the adjustment slider as required for the amount of Chroma (Color Vibrancy) desired. Anumeric value will be displayed in the box to the right of the slider.5) Store CCU Scene button: Once the desired scene adjustments have beenmade, this button will activate a pop-up menu that can be used to store this sceneinto one of the three User Defined Scene locations. These User Defined Scenescan be named as required for clarity. These User Defined CCU Scenes can beadjusted and re-saved at any time.6) Custom CCU Scene Labels: The labels for the (3) User Defined customizable Scenes can be changed asneeded. Mouse the cursor into the appropriate window and edit the text. Press Save to store these changesor press Cancel to exit this window.7) Global Preset Non-Tri-Sync Speeds: When Tri-Sync Presets are not being used, then this section governsthe pan, tilt and zoom speeds between the camera presets. These will be defaulted to a nominal level, but canbe tailored to most any application.Screen Shot: Admin Menu - Room LabelsThe Room Labels menu allows the Admin to label the company name, room name, room phone and help phone ona per RoboSHOT basis. The labels appear on every page at the top/middle of the page. Simply enter the roominformation and click Save.