The IR Camera's Default HostnameNoteCopy the default hostname from the label on the bottom of the camera, and keep this information in a placewhere it will be available to anyone who needs to work with the camera's web interface. This information isrequired to access the camera for initial configuration, or after a factory reset.Be sure to record the default hostname exactly as it is shown on the label.The RoboTRAK IR camera can only be configured via its web interface. Ensure that the team or individualconfiguring the RoboTRAK system has the IR camera's default hostname.Before You Install the CameraThe RoboTRAK presenter tracking system includes a dual wall mount which can be used with Vaddio'sOffset Drop-down Ceiling Mount for RoboTRAK, part number 535-2000-045. Contact us if you don’t havethe camera mount you need.NoteInstall the cameras with the IR camera directly above the video camera. Other physical orientations are notsupported, as they pose tuning/configuration challenges.n Choose a camera mounting location that will optimize camera performance. Consider camera viewingangles, lighting conditions, line-of-sight obstructions, and in-wall obstructions where the camera is to bemounted.n Ensure that the camera body can move freely and will point away from the ceiling and lights.n Follow the installation instructions included with the camera mount.13Integrator's Complete Guide to the RoboTRAK Presenter Tracking System
