VDO CD 4402 User Manual

Also see for CD 4402 -: Datasheet

Naming a Radio FrequencyUse this function to name a radio frequencywith a maximum of 12 letters for each title:this name will be displayed during playback.1- Short press ENTER.2- Select NAME with the keys.3- Press ENTER to display an alphanumericlist as typewriter.4- Scroll through the letters with thekeys and use the keys to get theupper-case letters, the lower-case letters,the numbers or the symbols.5- Press ENTER to display the character, andrepeat this operation for each character.6- At the end of the word, select [ ].7- Press ENTER to confirm the name.Note 11 : The title is attributed when all charac-ters and spaces are confirmed. If the memoryis full, the NAME function is no longer avai-lable: you have to delete a name.Note 22 : To delete a character, select [ ] atthe beginning of the alphanumeric list andpress ENTER.Saving a station in memoryYou can save up to 30 stations on the FM andMW wavebands and 10 stations on LW andSW wavebands.1- Short press ENTER.2- Select SAVE IN with the keys.3- Use the keys to select a memorynumber.4- Press ESC to enter the value.Note : It is not possible to manually save sta-tions from the FM AST or MW AST bands.Moving to the Tuner Init MenuUse this function to directly move to the TunerInit Menu.1- Short press ENTER.2- Select TUNER INIT with the keys.3- Press ENTER to get the tuner initialisationmenu (see next menu).Note : You can have access to this menu bylong pressing the ENTER key.Moving to the Main MenuUse this function to get the Main Menu.1- Short press ENTER.2- Select SAM with the keys.3- Press ENTER to get the Main Menu.TUNER INITIALISATION MENU1- Press the SOURCE key to select TUNER2- Long press ENTER to get the TUNER INITMENU (see options in cover page).3- Use the keys to select an option.4- Use the keys to set the option value.5- Press ESC to enter the value.Selecting the Scanning TypeOn your current waveband and for a scantime defined, you can select the scanningtype: stations or presets stations.1- Long press ENTER.2- Select SCAN TYPE with the keys.3- Use the keys, to select:- STATIONS to review all the stations onthe current waveband,- PRESETS to review all the pre-selectedstations on the current waveband.4- Press ESC to enter the value.Note : You can modify the scan time in theMain menu.Searching better TransmitterWith this function, the set can search for localor distant transmitters for better reception ofthe wavebands (in FM only).1- Long press ENTER.2- Select SEARCH LVL with the keys.3- Use the keys to select:- DISTANT (default value) for more power-ful distant transmitters,- LOCAL for lower-powered local stations.4- Press ESC to enter the value.Note : After a while, the function returns toDistant mode (default value).12