Vacon 100 Installation Manual

Also see for 100 INDUSTRIAL: Installation instruction Installation manual Installation manual Installation manual User manual

Contents

Vacon 100 Installation Manual Manual pdf 60 page image

6 CONTROL COMPARTMENT6.1 THE CONTROL COMPARTMENT OF THE ENCLOSED DRIVEThe enclosed drive has a door-mounted control compartment, separated from the cabinetsection, for the mains and motor cable terminals. You can have an access to the controlcompartment through a separate door located on the cabinet door.Connect the analogue signals (for example reference signals and temperature signals) andthe fieldbus cables directly to the correct option board.Make sure that the control cables are long enough to prevent tight bends in the cablesbetween the control compartment and the frame of the drive.The control compartment contains these items:• the control unit• the control panel• the option boards• the optional auxiliary components and the related wires• the terminals for internal connections• the terminals for control cabling• the order-specific documentation (on the inside of the door)• the optional buttons and signal lights (on the door)Connect the cables of the option boards OPTB2, OPTB4, OPTB5, OPTF3 and OPTF4(depending on the configuration of the drive) as default to the terminals for control cabling –XD2 on the control compartment. Do not connect the fieldbus board cables to theseterminals, but directly to the control terminals or the Ethernet terminal on the control unit.VACON · 60 CONTROL COMPARTMENT6 TEL. +358 (0)201 2121 · FAX +358 (0)201 212 205